DTC-001 Temperature controllers
DTC-001 temperature controllers. Compare model dimensions, technical specifications and installation drawings to configure your EOAT assembly.
Series image shown. Confirm the exact configuration against the model data below.
Price and lead time: confirmed on inquiry.
Technical specifications
DTC-001 technical specifications
| Parameter | Value |
|---|---|
| Model | DTC-001 |
| Temperature range | 0–200 °C |
| Thermocouple | K |
| Power supply | 100–240 VAC |
| No-load power consumption at 100 VAC | Approx. 3 W (5 VA) |
| Ambient temperature | 0–40 °C |
| Ambient humidity | 35–85% RH, non-condensing |
| Protection fuse | 1 × 15 A |
| Weight | 900 g |
Match the input voltage to the heater voltage before operation. Specify the heated-nipper model when ordering.
Controller sequence example
| Step | Operation | Position | Speed | Delay |
|---|---|---|---|---|
| S00 | Home | Home position | — | — |
| S01 | Fast feed | 7 mm remaining | 100 mm/s | — |
| S02 | Cut feed | 0.5 mm remaining | 0.4 mm/s | 0.5 s |
| S03 | Cut | Maximum position | 0.4 mm/s | 2.0 s |
| S04 | End cut / return | Home position | 80 mm/s | — |
Application example; set positions and signals for the actual machine. Up to 16 teaching points.
Technical drawings
Inspect mounting holes, dimensions and interfaces. Open a drawing to zoom in or download the image.
Enlarge drawing ↗DTC-001 · Dimensions
Application details for your quotation
Specify the material, gate cross-section, cutting position and temperature requirement when requesting a quotation. Confirm the blade and heating configuration for the application.
Read the selection guide ↗